Difference between revisions of "DSerial"
(→DSerial Components) |
|||
| (15 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
== DSerial Software == | == DSerial Software == | ||
| + | |||
| + | === Files === | ||
| + | |||
| + | Go to [[downloads]] | ||
=== DS Side === | === DS Side === | ||
| Line 23: | Line 27: | ||
! Symbol !! Package !! Description | ! Symbol !! Package !! Description | ||
|- | |- | ||
| − | | [[C8051F320|MCU]] || LQFP-32 || [http://www.silabs.com Silicon Laboratories] [[C8051F320]] USB microcontroller | + | | [[C8051F320|MCU]] || [http://www.zmd.de/pdf/packaging/LQFP32%20(7x7).pdf LQFP-32] || [http://www.silabs.com Silicon Laboratories] [[C8051F320]] USB microcontroller |
|- | |- | ||
| [[ADXL311|ACCEL]] || [http://www.analog.com/UploadedFiles/Packages/491921194E_8_1.pdf E-8] || [http://www.analog.com Analog Devices] [[ADXL311]] dual axis accelerometer | | [[ADXL311|ACCEL]] || [http://www.analog.com/UploadedFiles/Packages/491921194E_8_1.pdf E-8] || [http://www.analog.com Analog Devices] [[ADXL311]] dual axis accelerometer | ||
| Line 29: | Line 33: | ||
| [[MAX3221|MAX]] || [http://focus.ti.com/lit/ml/mtss001c/mtss001c.pdf TSSOP-16] || [http://www.ti.com Texas Instruments] [[MAX3221]] Single-Channel RS-232 Line Driver/Receiver | | [[MAX3221|MAX]] || [http://focus.ti.com/lit/ml/mtss001c/mtss001c.pdf TSSOP-16] || [http://www.ti.com Texas Instruments] [[MAX3221]] Single-Channel RS-232 Line Driver/Receiver | ||
|- | |- | ||
| − | | LED1, LED2 || 0805 || Status LEDs | + | | [[LEDs|LED1]], [[LEDs|LED2]] || 0805 || Status [[LEDs]] |
|- | |- | ||
| R1 || 0603 || 2kOhm resistor (not needed) | | R1 || 0603 || 2kOhm resistor (not needed) | ||
| Line 51: | Line 55: | ||
| USB || 6 || Mini USB connector | | USB || 6 || Mini USB connector | ||
|- | |- | ||
| − | | [[RS232 | + | | [[UART|RS232]] || 3 || RS232 level [[UART]] |
|- | |- | ||
| [[IO|IO1]] || 12 || First [[IO]] connector | | [[IO|IO1]] || 12 || First [[IO]] connector | ||
| Line 73: | Line 77: | ||
| X, Y || Analog || Selects duty cycle or analog mode for the accelerometer | | X, Y || Analog || Selects duty cycle or analog mode for the accelerometer | ||
|} | |} | ||
| + | |||
| + | === Schematic === | ||
| + | |||
| + | [[Image:Dserial-schematic.png|thumb|400px|none|DSerial Schematic]] | ||
=== Additional Pictures === | === Additional Pictures === | ||
[[Image:Dsserial-pcb.jpg|thumb|400px|none|DSerial PCB (Eagle3D)]] | [[Image:Dsserial-pcb.jpg|thumb|400px|none|DSerial PCB (Eagle3D)]] | ||
| + | [[Image:Dserial-batch.jpg|thumb|400px|none|DSerial batch]] | ||
| + | [[Image:Dserial-assembled.jpg|thumb|400px|none|DSerial assembled]] | ||
Latest revision as of 22:40, 9 September 2010
Contents
DSerial Software
Files
Go to downloads
DS Side
Microcontroller Side
DSerial Hardware
DSerial Components
DSerial uses ICs that require very few components.
| Symbol | Package | Description |
|---|---|---|
| MCU | LQFP-32 | Silicon Laboratories C8051F320 USB microcontroller |
| ACCEL | E-8 | Analog Devices ADXL311 dual axis accelerometer |
| MAX | TSSOP-16 | Texas Instruments MAX3221 Single-Channel RS-232 Line Driver/Receiver |
| LED1, LED2 | 0805 | Status LEDs |
| R1 | 0603 | 2kOhm resistor (not needed) |
| R2 | 0603 | 1MOhm resistor (for ACCEL) |
| R3, R4 | 0603 | current-limiting resistors (around 47Ohm) |
| C1, C2, C3, C4, C5 | 0603 | 0.1uF ceramic capacitors |
| C6 | 0603 | 0.1uF ceramic capacitor (decoupling cap for MCU) |
| C7, C8, C9 | 0603 | 0.1uF ceramic capacitors (for ACCEL) |
DSerial provides the following connectors.
| Symbol | Number of contacts | Description |
|---|---|---|
| USB | 6 | Mini USB connector |
| RS232 | 3 | RS232 level UART |
| IO1 | 12 | First IO connector |
| IO2 | 12 | Second IO connector |
| PROG | 4 | Programming connector (initial programming) |
| SLOT | 17 | DS Slot connector |
There are also a couple of solder jumpers.
| Symbol | Default | Description |
|---|---|---|
| PWR | Disabled | Enables USB powered mode |
| INV | Disconnected | Connects MAX3221 serial line sense to P0.7 of C8051F320. This could be used to detect whether a serial port is connected. |
| X, Y | Analog | Selects duty cycle or analog mode for the accelerometer |
